Tools needed:
wire cutters/strippers
soldering Iron
solder
electric tape(i prefer black but you can rice it out if you want
)
mounting hardware
MSD set-up:
1 remove the screw that holds the little black circle cover on
cut both wires and replace the cap
insert rpm pill
MSD install:
Heavy Red wire~Battery (+)
Heavy Black wire~Battery(-)
Red Wire~12 ignition source, i used the red/black wire on the the ecu side from the coil plug
Orange wire~ coil (+) red/black on the coil plug
Black~Coil (-) green/yellow wire on coil plug
White wire~green yellow wire ecu side from the coil plug
be sure to solder all connections.
__________________
1991 nx2000:Black:Wrecked:Sold
1992 nx2000:White: Sold
1993 nx2000 :Electric blue:Sold
its not who you do in life, its who you leave behind.
Jerry James Hays 9/1/1982-5/14/2006
Danielle Wilson 2/10/07
