Quote:
|
Originally Posted by NewKleer
as far as i know all "consult 2" cars are ODB2, ie they wont have the 14 pin grey connector.
but since s15 support consult 1, and i take it thats what a 200sx se-R is (i dont know USA cars), then it should work just like the S13 did.
you will also need the null modem adaptor for ur serial pda - because u want to hook up a serial "device" (as opposed to serial host in the PC for syncing). theres links on my site to some null modem adaptors, but any will do.
|
My car has both the 14 pin consult connector and the OBDII connector. On your website you state that ECUTALKPPC works with ipaq 2200...that pda seems very similar to my ipaq 1945. Do you know if the 2200 has a serial port or not...It doesn't look like it does...I looked at its spec sheet and it looks identical to my 1945 model...it sounds like in order for your software to work, the ipaq must have a serial port..is that correct?
-saaby
__________________
Red 99 SE-L with: KYB AGX, Ground Control 350 lb/in front 300 lb/in rear, Stillen front STB, Courtesy rear STB, Redline Shockproof, ES motor mounts 4-set, UR pulleys 2-set, Pacesetter short shifter, bent rear to zero toe, Fastbrakes 2-piece 11" rotor brake kit, Potenza S-03 tires, ACT HDSS clutch, JWT 9.5 lbs. flywheel, F-MAX stage I kit with T3/T04E, 370cc injectors, JWT ECU.
|
