|
No, if your using an early B14 ecu the consult for it is Consult-I and the above software will work just fine, assuming the connector is present and pinned out the same.
Consult-I or II is ecu dependant, so your JWT ecu is Consult-I, but you need to check the wiring diagram for your car to see if the consult pins are pulled out correctly to work with it. Worst case scenaria, I could (or you could if you've got the skills) build a harness inside the ecu for the consult pins.
__________________
All posts by Calum in this thread are copyrighted by Calum, and cannot be edited, deleted, or copied without his express permission.
calum@calumsult.com
|
