Well, after much delay and major procrastination on my part, here is the somewhat finished fuel rail for the GTiR Intake manifold....Ive got a couple things to hash out, but nothing big.
This is a direct bolt in solution for the GTiR Intake manifold to run aftermarket top feed injectors, other than these issues which will be worked out here shortly.
-The GTiR injectors use special orings to seal the injector at the manifold. This rail was designed and built to use these specific orings. They are a standard nissan part and have some on order with GregV over at Mossy. If they are the correct ones, ill just include them in with the rail kit.
-The other minor issue comes with a particular nut on the plenum that has to be removed in order for the rail to sit right. This is minor just because there is a place right next to it for a bolt to go in so you dont loose any sealing action between the lower plenum and the runners. Ill get photos of that here in a bit.
-Lastly, ill put in some set screws into the ultra trick brackets too keep the rail from sliding, right now its just sitting in there and does have lateral movement. The vertical movement is zero.
-From here, its just a matter of collecting the necessary hardware for mounting, and this will work with both the MSD style and Mototron style injectors.
Price is gonna be $200 shipped with everything you will need to install the rail (minus injectors, but including the 6an oring boss fittings). $250 if you want it polished, add in $25 for the FPR adapter to run the stock or Nismo style FPR. I expect to get all the hardware and orings in about a weeks time, once all that checks out, ill be ready to ship. International people, get with me on shipping prices.
SO, give me your feed back already.
