|
I REALLY REALLY REALLY NEED HELP! IM DOING THE SWAP 1.6 TO 2.0. IM HAVING THE SAME PROBLEM WITH THE HARNESS.. EVERYTHING IS FINE UNTILL YOU GET UNDER THE DASH AND THE 2 CLIPS FROM THE ECU DONT CONNECT TO THE PLUGS IN THE DASH. I CUT BOTH OF MY GA16 CLIPS IN THE ATTEPMT TO SPLICE THEM IN WITH THE 2.0 WIRE HANRESS CLIPS... . MY THEORY IS CHECK EVERY WIRE COLOR OF BOTH GA16 CLIP AND FIGURE OUT WHAT THEY DO AND FIGURE OUT EVERY WIRE THAT THE 2.0 HAS AND THEM MATCH THEM UP WITH THE GA16 CLIP so i can plug it in the dash harness! would that work. PLEASE I NEED HELP THIS IS MY ONLY CAR AND I CAN LET THIS SET ME BACK !
its a 94b13 the harness im using im not to sure what year it is but i will find out...
ONE OTHER THING. THE GA16 CLIP HAS 6 WIRES ON THE BOTTOM AND 9 WIRES ON THE TOP AND 2.0 CLIP HAS 7 WIRES ON THE BOTTOM AND 9 WIRES ON THE TOP! SO WHAT IS THE 7TH WIRE THAT COME OUT OF THE 2.0 CLIP
THE OTHE 2 CLIPS BOTH HAVE 6 WIRES COMMING OUT OF THEM....
sorry i about the caps i wrote alot of it before i relize it was on and im to lazy to rewrite everything.
Last edited by jen36; 10-14-2006 at 10:18 PM.
|
