|
Well what I have run into is that the passenger side will slide right in... but apparently not far enough, as the drive axle support bracket is about 1/16 " - 1/8 " too far away from the mounting holes... I can't put enough pressure on it to move it any more....
ALSO... I cannot get the drivers side in... I've had a friend hold the shaft, compressed it and I've hit it with a 10lb sledge and that &*(#^( won't go in... I cracked my axle nut in the process.... GRRR....
I guess the 98 200sx doesn't really accept this swap too well :/
|
