Connector Hork.
This was a bit of a pain because Nissan or Hitachi, whatever, decided to solder the screws holding the IC to the ECU frame.
You can see the 6 screws here.
Desoldered the pins for the connector.
I was able to remove one screw without cutting the head off but it took way too long so I just cut them all.
5 srews looked like this when the IC was removed.
I sucked some solder off the top of this screw and applied heat as I turned it out. This was not worth the time when you have Dremel skills.
ECU connector removed to be used as an adapter to the B14 harness.
IC can be reused if needed.
__________________
"Everybody can relax, I found the car. Needs some suspension work and shocks. Brakes, brake pads, lining, steering box, transmission, rear-end. "
My '00 SE with VE
Laid off and in need of work. I do Apple support, web and multimedia design and A/V production.
