here's mine in one of my Eggs ,, I've recorded an spl level of 152.2db.. all my power is REAL RMS ratings not the big bull crap #'s on the top of some amps, I used Rockford fosgate 0 guage power wire and Tsunami Rca's, juice is supplied from a Red top up front and a 10 farad Tsunami Cap in rear. system is at a 2ohm load...
All Boston Acoustic amps are class AB rated which is cleaner and more accurate with the RMS #'s the any class D amps
Boston Acoustic SL60 sperates
Boston Acoustic GT40-Dual-Mono Power @ 2-ohm (12.6VDC)
2x175W
Boston Acoustic GT28 -Dual-Mono Power @ 2-ohm (12.6VDC)
1x1100W
Boston Acoustic G5 10's in a Tony Boyd enclosure
KDAR JVC3000
For clear, crisp bass without the rattle. Adding Dynamat to the vehicle - especially the trunk -results in higher Sound Pressure Level (SPL).
Dynamat is the easiest-to-apply, thinnest and lightest material for adding sound pressure reinforcement to your car's body. When the panels don't rattle and balloon, you get higher SPL and tighter, louder bass!
and for rear fill I have SL65 coax,, no pic's but will post in a day or two
