right rear is visibly toed in, rear lateral link broke and was welded back together
i bought a replacement, went to swap it out and found that on chassis side, the adjustable bolt won't come out of the bracket because it hits the nut for the front lateral link, almost like someone put the bolt in backwards (ie. nut is at rear of car, bolt, towards front of car
point is i wanted to replace that lateral link, but it was such a pain to remove i gave up, and just want to try to correct the alignment so right rear is not toed in
Quote:
Originally Posted by budgetNX
its called an eccentric bolt. on the b13 there are two lower control arms. the rear one has an eccentric bolt where its connected to the chassis. hard to miss if ur looking.
why do u want to change it? are u doing an alignment?
|
