|
The EMU is connected to what ECU? OBD1 or OBD2???
The Greddy instructions for Cam/Crank Angle sensors are wrong: cam angle goes on Pin 30 of the OBDI ECU (Codes 11 and 21 might be because of this? Is timing reading correctly on datalogging if you select to read timing from crank/cam angle and not from the rpm signal?).
Also, there is no need to connect the injector ground.
NO INJECTOR ADAPTOR necessary.
At least that is my experience with the EMU and SR20, so hope this applies / helps.
__________________
Loading...
Last edited by gtswrx : 06-04-2008 at 08:48 PM.
|
