|
Thanks for the input Wes, I looked through your site and got a few good ideas on the ducting. From looking at it before I think the only thing that I need to do is block off the sides of the IC to the radiator and a small amount on the sides of the radiator... I'll take a look here shortly when I pull the nose off again.
_________________________
On other news, I'll be purchasing all the pieces for a DIY oil cooler kit by tomorrow. Here is what I'll probably be going with. I am trying to keep things simple as possible.
From 240sxmotoring...
Greddy sandwich plate 3/4-16 (w/built in 180F T-stat) $95
From Summit
B&M cooler with 1/2NPT inlet/outlets (11x5.75x1.5) $63
1/2NPT to -10AN fittings (x2) $9.50
Summit 10AN twist-tite fittings, $42 (2 straights and 2 90's)
10' Summit 10AN twist-tite hose $35
Last edited by McCoy; 07-29-2008 at 02:30 PM.
|
