Quote:
Originally Posted by McCoy
Thanks for the input Wes, I looked through your site and got a few good ideas on the ducting. From looking at it before I think the only thing that I need to do is block off the sides of the IC to the radiator and a small amount on the sides of the radiator... I'll take a look here shortly when I pull the nose off again.
_________________________
On other news, I'll be purchasing all the pieces for a DIY oil cooler kit by tomorrow. Here is what I'll probably be going with. I am trying to keep things simple as possible.
From racepartswholesale...
Mocal sandwich plate 3/4-16 (w/built in 180F T-stat) $85
Mocal 1/2" to -10 fittings (Pair) $16
From Summit
B&M cooler with 1/2NPT inlet/outlets (11x5.75x1.5) $63
1/2NPT to -10AN fittings (x2) $9.50
Summit 10AN twist-tite fittings, $51 (3 45's and 1 90)
10' Summit 10AN twist-tite hose $35
|
Sounds good. FWIW my pieces extend forward pretty far. The top panel we designed to snug up under the lip on top of the grill. The sides were riveted directly to the sides of the koyo and actually protrude in to the bumper cover, you can tell by their funky shape that we made templates to go around the ic piping and bumper cover.... Keep me posted on your findings!
