finally! my car - Page 28

Shift_Munky · 03-25-2008, 04:08 PM

Quote:

Originally Posted by Rockwood

Just make sure to make the mount solid. We welded ours onto the rear passenger side frame rail behind the wheel well. I just welded some 1" box steel together that was a little larger than the perimeter of the battery on its side, then welded some bolts to it for posts. I used a 1/4" thick piece of Al as a top strap and called it a day. Works pretty well so far, though we have thankfully not tested it yet...

Do you have any pictures of it?

Rockwood · 03-25-2008, 05:06 PM

Quote:

Originally Posted by Shift_Munky

Do you have any pictures of it?

It's not for sale...

We do, somewhere...

xanomie200sx · 05-03-2008, 02:16 PM

It has taken so long to read all 28 pages of this. Nice write-ups.

Dre240sx · 05-03-2008, 02:41 PM

hey quick question where are the rod bearing grade? i still cant find mine

thanks

jer_760 · 05-03-2008, 04:07 PM

Quote:

Originally Posted by Rockwood

It's not for sale...

We do, somewhere...

I would like to see some pictures of that also if you don't mind.

Shift_Munky · 05-07-2008, 08:32 PM

Quote:

Originally Posted by xanomie200sx

It has taken so long to read all 28 pages of this. Nice write-ups.

Thanks. Unfortunately I haven't done the best job keeping up and I'm always busy with something (mainly my son). I will do an update after my June track session at CMP though.

xanomie200sx · 05-08-2008, 12:35 PM

I know exactly what you're talking about. Between College, Work, and the girlfriend I never have time to work on the car.

1fastser · 05-10-2008, 08:49 PM

Whew...this was a read! Good thing I can do it on the clock at work - *** "the man" moved me to 2nd shift without notice

Anywayz...great write-up containing a plethora of good info.

Where in NC are you located? Anywhere near the thriving metropolis of Yadkinville? I have several relatives there.

I see Rockwood is still a PILL. Don't let him see those tiewraps in the engine bay!

Again...great job...Jody