4-23-09
Speaker brackets are now painted gloss black and clear coated. I'm going to wait to reinstall them since I don't want to scratch the paint.
I ended up making this piece which gets welded to the floor and allows the bolt to sit flat.
Just like before I had to tack completely around it to prevent from burning through the floor. After tacking grind down and you now have a good base to leave a decent bead.
I made different brackets which get bolted down since it didn't need to be curved anymore. Here the brace is tied into the front sub frame bolts with one support bar so far.
I have 2 small support bars left to make and weld on each side in the spot shown below. The bar shown below isn't cut correctly but it will give you a idea of what I'm talking about.
After I make those two last pieces I can pull the entire thing out and finish welding it up and then prep and paint.
