Quote:
|
Originally Posted by HawkINX4
Taken from Jgycustoms.com:
Use a 2'x2' sheet of plywood, one 2' 2x4, three bolts, three nails, and three nuts. Place the transmission face down on the board, drill and bolt transmission to board. Use remaining 2x4 and nail 2x4 to underside of plywood to allow UPS driver a void to put his hands in.
|
A) It costs more.
B) The bellhousing can be damaged in transit,
ask me how I know?
C) It requires more than hands, materials, and a
roll of tape. And whoever your sending it to
can't use it to send something else back out,
or the left over materials.
Peter
