Quote:
|
Originally Posted by insane imports
So we use our stock axles, clutch and flywheel? Would this trans be 6spd of 5spd? Sorry i dont know much about the b15's, besides the spec v's.
later,Jon
|
i don't know if the B15 trans is different but the P11 trans bolts right in after you change the Throw out shaft, the axles, flywheel, bellhousing bolts, there's even the holes drilled and tapped for the drivers side trans mount. the shift linkage is different where it goes into the transmission but it lines up perfectly, the shifter stabilizer on the P11 bolts to the transmission and on our cars bolts to the rear motor mount. just remove the bracket on the trans and keep the stabilizer attached to the rear mount. IT SERIOUSLY BOLTS RIGHT IN. try it....
