Quote:
|
Originally Posted by SR20Turbofreak
Its sooo cake. Just get one and you'll see. Its just 2 roll pins to punch out, and then rewire the rev and neutral sensors. everything else bolts and lines right up..
|
What clutch arm did you use for your swap? I'm using the B13 LSD arm and it required modification to fit in the P11 LSD trans. Also Slow96SER did this swap in his B14 and his clutch arm required the same modification.
Did you try using the sensors from your original trans? I wasn't sure if they were the same size. My trans only came with the sensor harness for the reverse switch which I was just going to rewire.
