Quote:
|
Originally Posted by myprojectB13
What clutch arm did you use for your swap? I'm using the B13 LSD arm and it required modification to fit in the P11 LSD trans. Also Slow96SER did this swap in his B14 and his clutch arm required the same modification.
Did you try using the sensors from your original trans? I wasn't sure if they were the same size. My trans only came with the sensor harness for the reverse switch which I was just going to rewire.
|
Any clutch arm will fit, the cable and Hydro swap easy. P10 LSD, non LSD, SE-R, they are all the same, the throw out forks are the same too. I have a B13 LSD clutch arm and i didn't need to modify it. What did you have to do? Well I don't rememmber having to do anything. The connectors are different. I haven't gotten around to getting the plugs. You can get them from the Infiniti Dealer for fairly cheap. I got the plug for my MAF for free cause the like me. I need Rev lights but i'm lazy to do it. It's a pretty brainless swap.. well for me at least, i could se some things that people may get confused over..
What did you have to do to the clutch arm?
