Quote:
|
Originally Posted by SR20Turbofreak
Any clutch arm will fit, the cable and Hydro swap easy. P10 LSD, non LSD, SE-R, they are all the same, the throw out forks are the same too. I have a B13 LSD clutch arm and i didn't need to modify it. What did you have to do? Well I don't rememmber having to do anything. The connectors are different. I haven't gotten around to getting the plugs. You can get them from the Infiniti Dealer for fairly cheap. I got the plug for my MAF for free cause the like me. I need Rev lights but i'm lazy to do it. It's a pretty brainless swap.. well for me at least, i could se some things that people may get confused over..
What did you have to do to the clutch arm?
|
What car did you put this in? A P10?
I used a B13 LSD clutch arm and it required modification. I'll load up some pictures tomorrow. Basically the arm wouldn't go into the trans far enough to allow the throwout bearing to line up. I needed to thin out the bottom of the shaft about a 1/2" to allow it to seat properly.
