I've never actually seen an SR20 ecu use both limiters though. Have you actually tested that? I'll try this weekend.
JayLew, what I was after was whether the board was the same. Awesome.
On the subject of daughterboards, mine are $100 installed, shipping inlcuded, or $100 shipped you do the install. I much prefer people let me do the install because most people overestimate their mad soldering skillz. Moving the CJ1 jumper to CJ2 is tricky if you've never done it before. Wait 'till the B14 boards come out, the jumper you have to move is one size smaller.
Hopefully they'll be on the sr20forum storefront soonish. Right now (ver 0) they're dual 29c256 based, with ZIF sockets so changing the roms is easy, both roms burnt straight up no multiple images. I've got 4 ver 0 boards left, when those are gone ver 1 will move to a different rom (the 29c256 is out of production).
Also if your looking for consult stuff, I'm going to have boards and kits available soon (boards are ordered again). I won't sell them assembled, they take too long to build. Look for a HOW TO in about two weeks. I laid out these board expressly for the home kit builder, lots of room, everything is labeled, very straight forward. Also have a schmitt trigger buffer on the input so they should (cross your fingers) work with every nissan consult enabled ecu.
