Nissan 200sx se-r ass drag [Archive] - SR20 Forum

: Nissan 200sx se-r ass drag


pbojovic
12-10-2001, 08:33 PM
I have a set of eibach springs on my car, with KYB and GABs. The rear end is about an inch or so lower than the front. I was wondering if anyone knew why this was...

PlanoSER
12-10-2001, 09:04 PM
ive got the kyb agx's with eibach prokit. My car looks like this too, but its not really dragging, it only looks lower because the rear fenders are cut lower than the front fenders.

2wdBlazer
12-10-2001, 09:56 PM
You could Put Eibach Sportlines in the Front & Eibach Pro's in the back and your car will be level. You gotta buy 2 sets of springs though.

BTW My car sits lower with the Sportlines.

spudnex
12-10-2001, 11:47 PM
pbojovic,

Have you considered coil-overs? With coil-overs you can set up your ride height exactly where you want it (front and rear).

redturbulance
12-12-2001, 05:05 PM
You can buy the B&G springs to fix this problem that is if you didn't already buy lowering springs or if you don't mind buying another set.

The B&G springs lower more in the front and less in the rear to give it that level look so you don't have the ass drag. My buddies se-r has these springs and they ride a little ruff but i don't know of a lowered car that doesn't.

This would be my fix

Mike sr20de
12-13-2001, 01:57 PM
or you could put "spring helpers" in the back springs!:D