Stock hood = about 30 lbs. vs. CF hood = 8 lbs.
Stock trunk lid = 32.5 lbs. vs. CF trunk lid = 13 lbs.
http://img105.exs.cx/img105/9122/b13cfhoodtrunkimage16db.jpg
http://img105.exs.cx/img105/9109/b13cfhoodtrunkimage24sz.jpg
http://img105.exs.cx/img105/3408/b13cfhoodtrunkimage39bl.jpg
http://img105.exs.cx/img105/7373/b13cfhoodtrunkimage47yd.jpg

P.S. - The hawker battery did just fine this morning - water temp was 7 deg F on the techtom, 0 deg F outside, hadn't been started for about 2 weeks, cranked slow but fired up!

NIce trunk, where did you get it from?

NIce trunk, where did you get it from?

http://www.syndicatekustomz.com/

Will work with 91-94 sentra. Have to cut holes for lights, trunk lock, etc.,
but that way it works with the 91-92 and the 93-94 style.

I did not put the inner tail lights on, nor the trunk lock.

Very nice quality.

Josh

I had the drill all the holes on my VIS too. Look really good man.

How much did the hood and trunk lid run you??


That shit is dope man.

Looking good Josh! Know you just need to give it a wash ;)

How much did the hood and trunk lid run you??


That shit is dope man.

I think it was $550 shipped.
DHL damaged the trunk, corners smashed a bit, so I should be getting
some back.

Looking good Josh! Know you just need to give it a wash ;)
Too bad it would freeze instantly! High of 5 degrees today, down to around
-8 or so tonight.
No traction at all with cold roads/tires and salt film...

sweet trunk!

Too bad it would freeze instantly! High of 5 degrees today, down to around
-8 or so tonight.


I know... it was 5 degrees this morning and currently a warm 15 degrees right now :(

550 for both hood and trunk? Man that's not bad.

http://www.syndicatekustomz.com/

Will work with 91-94 sentra. Have to cut holes for lights, trunk lock, etc.,
but that way it works with the 91-92 and the 93-94 style.

I did not put the inner tail lights on, nor the trunk lock.

Very nice quality.

Josh

That's strange, since the '91-'92 lights are the same size as the '93 -'94 lights.

the hood was 550 or the trunk was 550?

For the B14, they are each $550, so thats prolly what he paid

well I asked him how much the hood AND the trunk lid run..


He said 550 shipped. But it does seems a little low, so i'll just assume he was talking about the trunk.

the hood was 550 or the trunk was 550?
B13 cf trunk from syndicate kustomz was 550 shipped - May 2004 price.
B13 cf hood from kenley group buy (made by sunny stylin) was something like $285 not including shipping. That was a couple years ago I think. Didn't have to pay shipping because it was damaged.

sweet h00d and trunk :biggthump

Sorry, I don't mean to hijack this thread but are those Enkei RPF1 wheels? I have them on my 2002 camry. I'll be lookin at either Flik Blast-c or Flik Fuel (Black) wheels in 15x6.5 in. from http://www.edgeracing.com/1991/Nissan/Sentra/wheels/15/
for the 91 classic I just bought yesterday. This will be a while from now though as I first need to give the car a full tune up, then I will tackle basic power mods, then suspension mods, then wheels/tires, even though they fall into the suspension category, I'll do springs/shocks/struts first.

Sweeeet carbon fiber peices. Wow :eek2: on the price. Not quite in my budget, but looks great and you gotta love anything that removes 40+ pounds.

Sorry, I don't mean to hijack this thread but are those Enkei RPF1 wheels? ...then suspension mods...

Yes, they are RPF1 wheels.
Don't forget the Active Tuning RSTB :)

Update to my old post - I finally installed the trunk locks.
The install was kind of a PITA - just like the hood locks, but now the trunk sits level.

http://www.sr20forum.com/gallery/data/547/medium/CF_TrunkLocks_P4090065.jpg
http://www.sr20forum.com/gallery/data/547/medium/CF_TrunkLocks_P4090067.jpg
http://www.sr20forum.com/gallery/data/547/medium/SE_R_x_2a_P4090068.jpg