|
SpeedvizionSER 12-31-2001, 07:10 PM I know focuz makes a header for the 1.6 but there is no 2.0 listed. Being they are the same block would the header fit the 2.0 or will something not match up? Please let me know. If it will fit I'm gonna get it. Got a good deal on it.:cool: Thanks for the info. Everyone also have a happy and safe new years.:D DaGenesis 12-31-2001, 07:19 PM i doubt they have the same block, just looking at 1.6 headers you can see a bigger gap in the 2 & 3 cylinders, than in a sr20de header http://www.sentra.net/solm/december01/images/qg14.jpg GA16DE http://www.sentra.net/solm/september01/images/brad8.jpg SR20DE **paste in new window** Mach5motorsport 01-01-2002, 04:30 PM In no way will a 1.6 header work with the 20DE. mmmmmaybe with lots of duct tape.;) brian 01-01-2002, 11:02 PM it is not like a honda where everything will bolt together, these are waaaaaay diffrent in design, shape, ect, ect, the downpipe will bolt in, but nothing else..... SpeedvizionSER 01-02-2002, 09:11 AM I was told by some guy that runs a "performance" shop that the focuz headers would fit the SER models. When I asked him how that's possible he said it was the same block. Even though I know sr20de and ga16de sound like completely different engines, he told me he "had used the ga16 header on sr20 hundreds of times". So naturally I took the word of the "performance" shop guy. But I told him I would think about it. Which is when I came back and asked you guys because it just didn't seem right. Thanks for all your help. Another reason why sites like this are so important. Thanks again. P.S. Don't ever go to Rayco II in Eatontown | ||