PSSSHHHGOESMYSR20
01-13-2002, 09:49 AM
I'm curious as to what type of Oil coolers everyone is using on their turbo Sr20, I made the mistake of not getting one of these right off the bat, but I plan on rectifying the problem asap. Let me know PWEASE
|
unlucky 01-13-2002, 02:12 PM I used an oil cooler from a pickup truck that I found in the junk yard...:) Works great! Travis ShawnSE-R 01-13-2002, 03:16 PM What are you using for feed and outlet? unlucky 01-13-2002, 04:03 PM coming out of the oil sending unit to the cooler is 1/4" hydraulic hose. Coming out of the cooler to the turbo inlet is also 1/4" hydraulic hose. Going out of the turbo into the block is 5/8" hydraulic hose. I don't believe in all that expesive stainless steel braided line... Hydraulic hose with pressed on fittings will last just as long and withstand pressure/temp just as well as stainless hose. Calum 01-13-2002, 07:50 PM Where did you mount the cooler? mpg9999 01-13-2002, 10:11 PM I think there is a write up on an oil cooler at www.se-r.net Wicked R 01-14-2002, 03:01 AM Mike- E-mail me... I have a solution for you from a sponsor of my car... Eric_22_t@hotmail.com PSSSHHHGOESMYSR20 01-14-2002, 05:39 PM Eric, you have mail. Originally posted by Wicked R Mike- E-mail me... I have a solution for you from a sponsor of my car... Eric_22_t@hotmail.com | ||
vBulletin® Copyright ©2000-2012, Jelsoft Enterprises Ltd.