Does it works? what psi are recommended?

Thanx.

What the....?!

Does it works? what psi are recommended?

Thanx.

The factory one is set at 3 bar, Ther are many aftermarket fuel pressure regulators. your question makes no sense. Of course they work and most ppl on this board run 4bar but it really depends on your fuel setup.

No it doesnt

87.88psi

your welcome


http://www.sr20forum.com/search.php?

88psi???? maybe if your hairdryer's @ 20+lbs of boost? damn... that must mean that at WOT it's close to a 100psi... - diesel se-r - .... jk..

88psi???? maybe if your hairdryer's @ 20+lbs of boost? damn... that must mean that at WOT it's close to a 100psi... - diesel se-r - .... jk..

I hope you understand I was not being serious. The recent influx of stupid questions has made me ornery.

SentraDragon thanx 4 your help, but if you think mi question is stupid please don't answer it..... I supose here are decent people who like to help new "sr20" lovers, not only clowns like this one.....

http://www.sr20forum.com/search.php? is your new best friend. Really. No joke.

Try 'FPR', titles only and limit your search to the 'Main Forums'. About 100 threads of pure answers. Here's an actual thread:

http://www.sr20forum.com/showthread.php?t=68938&highlight=Fuel+Pressure+Regulator

This is how you're going to get real answers, especially since you didn't provide nearly enough info for someone to answer it for you.

FPR under boost? my car is N/A.....

FPR under boost? my car is N/A.....

See, this is why searching and asking better questions might help you-- only you knew that until you just posted it. How are people supposed to help you without your giving info about the car you drive?

Just search, there's a ton of information available about this. If you do some reading and have some questions when you're done, then ask.

BTW, http://www.sr20forum.com/showthread.php?t=105036&highlight=%22fuel+pressure%22+%22psi%22

if you don't know what something does, logic should tell you not to screw with it until you learn first. and by Learn, I mean, research, not ask and wait.

Off course I know what the FPR does, I just want to know what pressure would work the best with a stock SR20.

Thanx.

Off course I know what the FPR does, I just want to know what pressure would work the best with a stock SR20.

3 bar works great, i dont think stock fuel is maxxed until like 230 hp iirc.

3 bar works great, i dont think stock fuel is maxxed until like 230 hp iirc.

that depends on what injectors you have.

Off course I know what the FPR does, I just want to know what pressure would work the best with a stock SR20.

Thanx.


Well think about it a stock SR20 probably works best with stock fuel pressure. Stock fuel pressure is 3 bar. there is no need to change it.