Anyone know a place in Houston that has a former for bead rolling IC piping. I'd Rather not have a bead welded on if I don't have to.

Thanks,

Not me. But I'd like to know also.

Looks like I may go the Epoxy Bead route.

Dwayne,
Who have you contacted up there? Also, I am coming to town today. Give me a call and maybe I can come buy and look at your egg this weekend.

361-739-8434

Jon

Hey I didn't get your message till just now.

Where you coming up here last weekend 1/26/02 or next weekend 2/2/02 ?

Dwayne,
I was up there Saturday and Sunday.... Had dinner with Geo and Kerri (sp)... Maybe next time then?

Jon

Yeah.

As soon I have my car running With no problems I'm bringing it down there. so maybe then. just a few more weeks.

My Manifold is comming together and should be done in a few days. I found a Welder here who does really good work. My manifold and IC piping all Tig welded. I may have him do my Exhaust piping or at least my downpipe as well. This weekend I should have the Turbo & Wastegate mounted and IC piping all Installed. Then Its time to do some more FAB for the DP and Exhaust.

On the Inlet right before the turbo where the MAF recurculating pipe is what is the other little pipe for and where does it hook up to?

also do you know if I need the little vacume line that connects right bevore the Throttle body?

Its been a long time since I looked at all that connected I'm not sure how it all goes.

Remember that Cone filter you gave me like 5 years ago?
I'll be using it instead of the POP till I get some kind of adaptor.

Dwayne,
The hose you are refering to should got back right before the throttle body.

Jon

I have to add this little pipe right before the TB and its supposed to connect to the AAC valve how and where does it connect to the manifold.

I have to look tonight and see.