|
SE-R Newbie 02-08-2002, 10:14 PM Hey All, I was thinking of going with a Eibach springs (1.4) and KYB AGX struts setup on my 1991 Sentra SE-R. Any recommendation on camber plates? Would I need camber plates for the rear? Thanks SE-R Newbie Racerlinn 02-08-2002, 11:32 PM '92 SE-R with Eibach ProKits and AGX's. Most I could get stock (recent alignment) was negative 1.0 of the fronts and negative 1.5 on the rears. I was wanting negative 1.5 all around, but I'll live with what I got stock. If you want more than that you will probably have to go with crash bolts or plates. Its311Pete 02-10-2002, 03:29 AM Most I could get stock (recent alignment) was negative 1.0 of the fronts and negative 1.5 on the rears. I was wanting negative 1.5 all around, but I'll live with what I got stock. Racerlinn Running 1.0 negative camber do you have any wear problems with your tires? Also what is factory specs for front and rear camber? I will be doing a front align after I install my JDM and want to get the max without causing abnormal wear. Darren | ||