all sales are firm and include shipping. :rofl: :biggthump

100% Aluminum, hand welded, constructed with a bar & plate design. 24x12x4 Polished finish intercooler. Perfect for your next turbo project or upgrade. low pressure drop 0.2psi at 15psi *Strong Bar and plate design allow 80psi high efficient we are very confident on our BAR AND PLATE intercoolers against efficient,reliability, all our intercoolers have been tested to withstand more then 80psi pressure and it has very small pressure drop across the end tanks, at 15psi inlet the out let has 14.8psi that means it has only 0.2 psi pressure drop ,compare to many other intercoolers it is an excellent figure (some intercooler havr 1-2psi pressure drop) also at the same condition, the temperature has drop from 120 degree to 28 degree ( and it is an excellent figure for efficiency)

Allow more flow to the radiator for drift applications!


Intercooler
20"x6"x2.5" 520x157x60 (Tube & Fin design) FMIC 2.75" Inlet IC-Z3013A $200 SHIPPED (good for 200-300hp)
http://xo2racing.com/show/images/Intercooler/ic-z3013a.jpg
20"x9"x2.5" 520x235x60 (Tube & Fin design) FMIC 2.75" Inlet IC-Z3013 $210 SHIPPED (good for 300-400hp)
http://xo2racing.com/show/images/Intercooler/ic-z3013.jpg
18"X6.5"X3.5" 460x160x90 (Bar & Plate design) 2.5" inlet GY-101 $210 SHIPPED (good for 250-350hp)
http://xo2racing.com/show/images/Intercooler/ic-gy-101.jpg
19"x12"x3" 480x300x76 (Bar & Plate design) 3" inlet GY-104 $220 SHIPPED(good for 400-500hp)
http://xo2racing.com/show/images/Intercooler/ic-gy-104.jpg
24"x9"x3" 600x228x75 (Bar & Plate design) FMIC 2.5"inlet IC-GY230 $230 SHIPPED SOLD OUT
http://xo2racing.com/show/images/Intercooler/ic-gy-230.jpg
24"x12"x3" 600x300x75 ( Bar & Plate design) FMIC 3" inlet IC-GY12 $240 SHIPPED (600-700hp)
http://xo2racing.com/show/images/Intercooler/ic-gy-12.jpg
24"x12"x4" 600x300x100 ( Bar & Plate design) FMIC 3" inlet IC-GY100
http://xo2racing.com/show/images/Intercooler/ic-gy-100.jpg
$260 SHIPPED (good for 700-800hp)

Who makes these intercoolers?

-B

XO2 racing in el monte, california.

no one interested??? bump!

Reccomended horsepower on the 20"x9"x2.5" 520x235x60 (Tube & Fin design) FMIC 2.75" Inlet IC-Z3013 $210 SHIPPED

Reccomended horsepower on the 20"x9"x2.5" 520x235x60 (Tube & Fin design) FMIC 2.75" Inlet IC-Z3013 $210 SHIPPED


thats right, someone buy this! :biggthump

I am interested but whats the reccomended power levels for it?

Yeah, more information like pressure drop and power rating would be nice. No one on here will buy them if you do not have some type of information on them.

Corey

Yeah, more information like pressure drop and power rating would be nice. No one on here will buy them if you do not have some type of information on them.

Corey

all specs will be added soon, just wanted to see if there was any interest. :biggthump

24"x12"x4" 600x300x100 ( Bar & Plate design) FMIC 3" inlet IC-GY100

What is price and availability on this intercooler above. I have cash and would like this shipped out before the end of the week. Thanks

more info. edited at the top^^^^^^^^^^^^^^^^^^^^^^

Is there any possibility to have the 24"x9"x3" ( SOLD OUT) in a near futur ? I really want one like that for my setup.

Mart

yeah I want one of those two....if necessary I'll pick up the next larger one, but I really don't want the overkill....

Hey i got an Vendor accout today. Thanks for you help.

Got any info on these yet???

24"x9"x3 bar and plate i would like one of those also. when can we get them i have cash in hand

24"x9"x3 bar and plate i would like one of those also. when can we get them i have cash in hand

im afraid we wont have that one until the middle of october. :( i'll keep you updated on that one though :rofl:

im afraid we wont have that one until the middle of october. :( i'll keep you updated on that one though :rofl:

Everyone 24"x9"x3" 600x228x75 (Bar & Plate design) FMIC 2.5"inlet IC-GY230 $230 SHIPPED are IN STOCK NOW. ORDER BEFORE IT GONE........;) ;)