I got a bluebird in a 200sx se, got a highport harness, but not all the connectors have a place to go. I would have hooked up the harness before the motor went in but I got the car like this so I wasn't able to see everything on the motor. I have connector left over on the passenger side of the engine bay the connector looks like the connector for the knock sensor, one over by the distributor, one on the TB side of the injector harnesses that I figure went to the egr, then my biggest concern is 5 connectors over by where the air box would be, 2 come from the chassis and are fastened to a metal plate, the other three come from the end of trans harness. I need help please any info is much appreciated. I'll try to get pics asap

does anyone have any idea?

have you tried starting it up yet?

I live in Sarasota, maybe I can drop by sunday and take a look at it.

The ones connected to the metal plate are the tranny switches, IIRC. That metal plate is bolted to the top of the tranny housing, directly underneath the battery/airbox area. They are for neutral switch, reverse lights, etc.

Yea if you want to come by that'd be cool with me, I tryed turning the key just to see what it would do but I got nothing, but I don't have the in-car harnesses wired up yet. I can't find any other plugs over the top of the tranny I hooked up the ones I saw and looked diligently for other ones but no luck, would there be extra ones for an auto that I wouldn't use cause its 5spd?