|
lucas240sx 09-26-2005, 05:57 PM i need to know if there is a difference between a non z32 mass air flow and a z32 turbo mass air flow i was told that u need the turbo z32 maf for the sr20det i was also told that it doesnt matter i want to know if there is and is there a speacial way u have to hook it up thx!!! Nyc Sr20PowerD 09-26-2005, 06:07 PM doesnt matter same part number same maf lucas240sx 09-26-2005, 06:09 PM doesnt matter same part number same maf i was told that one is bigger than the other should it just wire right up with it or do u need to wire it up differently?? mn180drifter 09-27-2005, 09:48 AM I have wired on up cake wake. use this from JWT http://jimwolftechnology.com/wolfpd...R%20NISSANS.PDF Remeber that if you are whiching out the mass air sensor that you also need to replace injectors, and get the ECU reprogrammed to except everything, or it wount run. tuley95LS 09-27-2005, 01:21 PM get an safc, fpr, 255 and turn it up to 4 bar, should be good for 300 horse. 240nubsx 09-28-2005, 12:24 AM jwt is wrong, they say both grounds go together. nope(you will run extra rich). 2 black ground wires- one ground goes to maf the skinny black wire is a seperate chassis ground tuley95LS 09-28-2005, 01:33 AM jwt is wrong, they say both grounds go together. nope(you will run extra rich). 2 black ground wires- one ground goes to maf the skinny black wire is a seperate chassis ground they say that so there is really no chance for you to blow up, its the safest thing out there Will 09-28-2005, 02:09 AM i was told that one is bigger than the other they are exactly the same. lucas240sx 09-28-2005, 08:10 PM thx all for the help thats what i needed to know | ||