Do any of you have pictures of how you T'ed off the oil pressure sending unit for the oil for your turbo and how you hooked up your Oil Pressure Gauge? TIA



Terrin
92 SE-R

http://www.angelfire.com/tx4/kwak/oil_pickup.html

:)

Does anyone know a particular place or a common place to all to get these tees from.

http://www.mcmaster.com/ :D

IMHO McMaster makes you buy too many. For the npt stuff try an auto parts store or Home Depot/Lowes. If all else fails go to www.hoseandfittings.com. For oil line and fittings use www.anplumbing.com. Both companies have a good site, good prices, and good service.

If you're looking for the OEM style stuff, good luck. :D no part numbers and friggin' banjo fittings from hell :D

I'll work up a post this weekend for the hoses for a T25 to DE set up with part #s, prices, etc. maybe some pics.

Cheers,
Charlie :)

PS I never did find a oil return fitting. I hand carved one from an 1/2" npt floor flange from Home Depot. A glorious piece of fine mechanical artistry :D

You mean the part that goes into the block from the drill and tap I sent you? It's 1/2" NPT threads and you can pick up a fitting at Lowe's.