I own a 96 200sx se-r and was looking to put some 91 Sentra SE-R cams in it. What type of ecu can i run to make this best work. Whats the cheapest set up i can do because money is diff. a problem. Thanks aaron

if u plan on gettin the 91 cams, just get the intake cam, our exhaust cams are the same
u can run this cam with ur stock ecu, but i suggest u get a g20 ecu that raises ur rev limit to 7500rpms and no speed governor

You do not need an ECU to take advantage of 91 cams, just throw em in, and they will work!

Yep, cheapest set up is throw it in there and go!!!!!!
NO ECU required.

Where can I get a g20 ecu at? would andreas mike have one?

Originally posted by ser_lover
Where can I get a g20 ecu at? would and. mike have one?

You mean andreas miko? :confused:
He might have one.

Alright....i will send him a message.....how much should i give for one?

see if he can hook u up with a cam / ecu combo
the cam @80ish
ecu ive seen them go for @125 i think

Thats sounds good. There were some cams on ebay that were brand new going for 50 something but i havent bid on them and dont know how much they will go for? Are those prices shipped?

anyone know of a complete site on installing cams or a book that would show me. going to install some soon in my car and dont know how

get a factory service manual..
till then check out naji's site... read it, learn it, read it again
Bookmark this site now (http://www.geocities.com/n_dahi/)
:)

Sorry if this is a little off the subject but, will the g20 ecu work in my '98 200sx ser? If so what do I get...the 98 g20? Or is there another option. For now I'm just after raising the rev limiter and removing the speed governor. Cams, and possibly turbo will come later.

Yes the G20 ECU should work in your '98 200sx. That will give you the raised rev-limiter and getting rid of the speed governor.