Would this be a problem? I only need one mount and Prothane sells it by itself.

I don't think it would be a problem at all. Each mount is really seperate from the others, so the only possible issue would be if the ES mounts have failed (or sagging severly) and the Prothane is doing what it is supposed to do. Then something could be crooked - if it is the tranny then your axles could be angled diff't.

Did I talk you out of it? ;) After they break-in, all 4 isn't that bad anyway. Realisticly, you should be OK.

Josh

I wouldn't see why not. The pass mount prothane makes is exactly the same as the ES one afaik.

I've got stock pass. one ES in the mount under the battery tray, and self-poured the other two.

won't having one prothane cause stress on the others?i had the pass prothane for a while and it made my rear insert sag..just get them all to prevent future labor

won't having one prothane cause stress on the others?i had the pass prothane for a while and it made my rear insert sag..just get them all to prevent future labor
Thats what I have to do.