kenley_ser
02-21-2002, 01:40 PM
Does anybody know the part number to fit your O2 sensor into the elbow of a T25 elbow, can we just tap it and make it bigger, if so whats the thread, I need help please help me guys.
Also I heard that nissan sells an adapter, what do I ask them, does anybody have a part number. Thankyou also where can I get the cheapest O2 sensor cause:
Im only getting about 130 160 miles per TANK
140 driving fast
160 just cruising
Rockwood
02-21-2002, 04:34 PM
the adapter is in your stock exhaust manifold, it is a bolt that bolts into the manifold that the 02 sensor bolts into.
did i say bolt enough times there?
brian
02-21-2002, 05:05 PM
no why? ya, it will bolt right in, they all use the same one...
Whitelightening
03-04-2004, 12:19 PM
anyone have any info on this
Tomcat5678
03-04-2004, 01:42 PM
The T25 elbow has a smaller O2 bung to accomadate the smaller Bluebird O2 sensor. All you have to do is spray that with some WD-40 or similar (it is usually really tight in the elbow) and swap it with your stock DE O2 bung. I just bought a new bung off of someone here on the forum but it was just a DE bung.
Hopefully this clears things up for you.
-Erik
nismo91
03-04-2004, 02:48 PM
The T25 elbow has a smaller O2 bung to accomadate the smaller Bluebird O2 sensor. All you have to do is spray that with some WD-40 or similar (it is usually really tight in the elbow) and swap it with your stock DE O2 bung. I just bought a new bung off of someone here on the forum but it was just a DE bung.
Hopefully this clears things up for you.
-Erik
Bingo!!! It's the same thing that HotshtSR20 said but more details! LOL
Basically you need to remove the BB O2 sensor and bung. Replace with the US O2 and Bung and your good to go.
On another note: Your car should be running really rough since you are still using the BB O2 sensor and using JWT ECU (if you are). JWT usually programs your ECU for a US O2 sensor unless you have specified the BB O2 sensor.