Ackvan
11-09-2005, 10:02 AM
The B15 their SE models have 2.0L motors in them. Does anybody think that the B15 SE motor can be used in a B13 or B14 without any major modifications.
|
: Se 2.0 StevenLK 11-09-2005, 10:18 AM its the same motor as the other generations w/ sr20's. Domiken 11-09-2005, 10:59 AM Actually its not, its the roller rocker SR20. But its no modification at all. A guy stuck one in his 95' P10 on G20.net, you would have to use your intake manifold, exhaust manifold, & your valve cover. Look it up, my local friend then stuck a 2001 G20 motor (same as B15 SE) in his 94' P10 after reading up the thorough article on G20.net. intiractive 11-09-2005, 02:37 PM you will have to swap wiring harnesses too Domiken 11-09-2005, 02:40 PM you will have to swap wiring harnesses too Nope he wont, not if he uses his intake manifold. Look dude, just make it a BARE LONG BLOCK, stick your current stuff on it and call it a day. If anything, stick some JWT valve springs and retainers and S3R cams while you are at it so you can rev safely past 6750RPM. This motor is not intended to be revved any higher, but it will with your current ECU. jer_760 11-09-2005, 02:41 PM Actually its not, its the roller rocker SR20. But its no modification at all. A guy stuck one in his 95' P10 on G20.net, you would have to use your intake manifold, exhaust manifold, & your valve cover. Look it up, my local friend then stuck a 2001 G20 motor (same as B15 SE) in his 94' P10 after reading up the thorough article on G20.net. How can he use his valve cover for the roller rocker motor? I thought they were different, I know the rr valve cover is taller. :confused: viprdude 11-09-2005, 02:51 PM im wondering the same thing jer is. howard_w13 11-09-2005, 09:17 PM Isn't the MAF and EQU different for the roller-rocker as well?:confused: Will 11-09-2005, 09:32 PM Isn't the MAF and EQU different for the roller-rocker as well?:confused: that is why he would use HIS MAF and HIS ECU and HIS wireing harness Keo 11-09-2005, 10:10 PM http://sportcompactcarweb.com/tech/0311scc_roadracer/ Domiken 11-10-2005, 09:26 AM How can he use his valve cover for the roller rocker motor? I thought they were different, I know the rr valve cover is taller. :confused: Because its taller due to the components and runoffs being different instead of outside the valve cover. Look it up man, im not explaining it. Its very easy to do, its been done before many times. Its SIMPLE.... DE LONG BLOCK with your stock components and you are fine. Look it up under MIKE.COM on G20.net HERE: http://www.g20.net/forum/showthread.php?t=19230&highlight=JDM+roller+rocker+motor | ||
vBulletin® Copyright ©2000-2012, Jelsoft Enterprises Ltd.