|
specvezy 11-20-2005, 09:10 PM I ran a 9.047 at 75mph with a 1.967 60ft in the 1/8 on slicks my mods are 3" exhuast cone air filter and a ss autochrome header Is this time good or should i be faster? nissansr20nx 11-20-2005, 10:15 PM What kind of car is it. If it is a SR20 powered car that is great!! But your forum name makes it hard to see!! SE-R_Tj 11-21-2005, 12:08 PM difficult to believe if you don't have weight reduction... specvezy 11-21-2005, 04:27 PM oh yea i had a specv to thats where i got the neame from, but this time is from my 93 classis. How would it be difficult to believe i ran that time more than once back to back and the only weight reduction is my spare tire and jack. The only mods i have are 3"inch exhuast cone filter ss autochrome header maybe its the jdm motor but its all stock no cams or anything just those 3 mods with slicks Nismo87SE 11-21-2005, 04:33 PM Can you post the full timeslip like 330' as well? That is an excellent time my best without n2o was 9.177 @ 74mph with a 1.90 60' on slicks. What size slicks did you use, 20in or 22in? My car was like 2750lbs raceweight with me (155lb), so your car should be around 2550-2600lbs race weight for that trap and mods. specvezy 11-21-2005, 05:05 PM Can you post the full timeslip like 330' as well? That is an excellent time my best without n2o was 9.177 @ 74mph with a 1.90 60' on slicks. What size slicks did you use, 20in or 22in? My car was like 2750lbs raceweight with me (155lb), so your car should be around 2550-2600lbs race weight for that trap and mods.my slicks are 7.5/23-15 RT.083 60' 2.052 330 5,937 mph 58.70 1/8 9.174 mph 74.74 rt. .190 60. 1.963 330 5.820 mph 59.03 1/8 9.046 mph 75.07 rt .023 60. 1.995 330 5,853 mph 58.95 1/8 9.087 mph 74.85 nissansr20nx 11-21-2005, 11:46 PM I am honestly impressed. That thing must be hooking and pulling awesome off the line!! AaroNX 11-22-2005, 11:45 AM That's a STRONG motor or a light car. I run 8.9's NA on 20" slicks but I've got more mods and I'm probably ALOT lighter. Never made a pass NA on the 22" slicks, so I'm not sure how to really compare the slick part. 3" is alot of difference though. OH I usually pull 1.92 60's NA. specvezy 11-22-2005, 02:07 PM its a rebuild jdm motor, yea its strong i hardly drive it just to go run it thats about it. Is a cold air better or JWT pop charger? AaroNX 11-22-2005, 02:15 PM I use both. My pop charger is on the end of my cold air intake. | ||