|
: Turbo install on P11 Primera P11565 11-21-2005, 12:38 PM As i understand it the 98 P11 Primera GT has the same engine as the GTi-R but without the turbo, so if I found a complete GTi-R engine would I be able to just transfer the turbo parts across? Sounds a bit too simple nametakennow 11-21-2005, 05:05 PM Pretty much, you'd need a custom oil/water feed/return setup, and you'd have to drill/tap the block, plus the compression rate is different, so you'd need to tune it right, but such things happen all the time. It's rather simple, do some searching and see if it's something you're up to doing :). t bags 11-21-2005, 05:15 PM i think knuckeduster has a great write up on this mod.. Crim 11-21-2005, 05:19 PM i think knuckeduster has a great write up on this mod.. The installing a turbo on a non turbo motor mod? :D P11565 11-22-2005, 02:35 PM Coool :-) Raceworx 11-22-2005, 02:39 PM GTi-R head is different cams are solid lofters and it flows better... IIRC P11 will have RR low port head or High port hydrolic lifters.. classicser 11-22-2005, 03:31 PM g20.net tons of p11 specific info | ||