maxxed-sx
12-04-2005, 12:13 AM
Ok so I should be in the shop next week to re-DYNO tune my new setup what do we think I will put down?
SR20DET Blacktop
Full-Race Topmount
GT3076R T3 .82
3" Turbo Back Exhaust
Greddy Replica Intake Manifold
HKS Step 1 Cams
UR Crank Pulley
GReddy FMIC
DeatschWerks 650cc Injectors
XS Ignition Amplifier
XAT Rom Tune
Pretty sure those are all the power upgrades...
sr20det808
12-04-2005, 12:30 AM
u forgot something important.. how much boost?! 300 very easy ***...
maxxed-sx
12-04-2005, 12:36 AM
Sh!t duh,...
18-20psi on 93 Octane
I hit 351 at 18psi on my GT3071R T2 .86 on a stock turbo mani. So with this T3 3076R and the Full Race mani I am hoping for 420-440.
fstsil80
12-04-2005, 02:38 AM
Sh!t duh,...
18-20psi on 93 Octane
I hit 351 at 18psi on my GT3071R T2 .86 on a stock turbo mani. So with this T3 3076R and the Full Race mani I am hoping for 420-440.
sounds about right, good luck!
fstsil80
12-04-2005, 02:40 AM
ohh, yah, have you considers bigger inectors? you might want to step up to 750's
i have a set fs if intrested
maxxed-sx
12-04-2005, 03:07 AM
How much I was going to pickup some 750 from Deatschwo..... on Monday but maybe I will get them from you.
yingtiry
12-04-2005, 07:29 PM
On 93 and 18-20psi i would predict 350whp. based on what my setup did with the gt3037
himbo
12-04-2005, 09:08 PM
thats what i also wonder. i plan on going with a gt30r setup here's my little shopping list:
hks 264 step 2 cams, titanium retainers, hks valve springs, port/polish, bored O2 induction t/b, GT30R turbo, fidanza flywheel, and UR pullies, 1.2-1.5mm head gasket, and a JWT ECU
for some reason, i figured i'd get 350whp with like maybe 15psi