Hey everybody,

I've run into a slight problem here. Today, I decided to check my TPS and I
set it at .410 at idle and at 4.1x at WOT. Then when I started the car, my
idle was at 1,500 rpm. So I decided to set it at .541 at idle and at 4.30 at
WOT. But the problem still persists. I've just disconnected my battery to
reset the ECU. If this doesn't work, what could I do to bring back my rpm's
to normal? TIA

when the voltage of your tps changes, you should adjust the idle by way of the idle screw also.

Well peolple, I just did the Idle speed adjustment procedure. Everything is well now.
:-) DOH!! Why didn't I think of this before. Anyways, thanks for the help, I appreciate it. BTW, should I set the TPS closer to 0.40 or closer to 0.55? TIA


RPWSER:

It's not recomended to mess around with the idle screw, I just did the procedure as said here http://www.se-r.net/engine/adjust_idle.html and everything went back to normal, no need to mess with the idle screw :)

I believe the TPS should be set between .45-.55v according to www.se-r.net/engine/tps_voltage_adjustment.html