OK i searched just tell me how to do it..

all i need to do is put in the resistors, the injector harness was hacked up when i took over this project.. now.. where do i put them.? on the colored wires or the white ground.. are all the injectors on the same wire in the plug? anyone got a pic of this? i need info ASAP please.

i kinda got the harness together but some sorta diagram would be helpfull.. help me finish this car today!

i soldered mine but the ecu theres pin outs for which wires they are somewhere here just gotta search. u can match the wires up by eye pretty well from loooking at the injector wires colors then going down to the ecu plug. its something like pin111 105 107and one more, not sure exactly because its been a while so dont quote me.

my question is on the harness plug do all the injectors share the same ground? i need some sorta diagram.

ok it runs now. got it figured out but it runs like ass... doesnt want to rev and pops like crazy any ideas?

oh and can you use the de maf or do you have to use the GTIR for the JWT ecu?

That depends on what it's programmed for. If you're running a de maf and it won't rev then try the gtir maf. Do you have an Safc?

it will run rich without the resistors did u instal them?