You need the pull the brake line through so you have almost no slack between where the cable mounts and the caliper, my lines move in the hex portion for adjustment, then you can put cable ties on each side to keep it from generating slack. Mine are technafit BTW, nice lines, just the hex is 17mm instead of 19mm so I have to zip tie the metal portion/horse shoe clip to the strut.

The problem that I had was that the mounting bracket for the brake line on the strut was bent outward toward the wheel. a little bit of bending back to it's origional possition corrected this problem.

It's the 1 inch'er your looking for, when you look at the Master cylinder piston diameter, not the 7/8 inch?

Napa has the 1" with only two ports for brake lines, but I do not see the link or a photo to a part number with a 4 port x 1" master cylinder. Anyone able to help, please send me a PM with the part number.

napa master cylinder number: UP 390141
(((notice only two plumbing ports))))
http://i40.photobucket.com/albums/e204/nenstice/MC1.jpg
...As from another great link on the subject).


Number of ports = 4 for the standard brakes
2 for ABS