|
seriuss 03-08-2002, 11:29 PM I plan on purchasing 16x7 wheels, but I am not sure what offset I should get. Is there a formula or something to determine the right size? I know the stock wheels are 15"x 6" wheel with 40mm offset, 59mm center bore . So would 16x7 w/ 40mm offset be ok? Any suggestions? jacen99SE 03-09-2002, 09:17 PM I've read that 35-40mm should work. 98sr20ve 03-18-2002, 08:30 PM 7 inch rims in a 35-40 offset should be fine. What kind of wheels are you looking at. Steve seriuss 03-18-2002, 11:46 PM Enkei RS5 16x7s w/ 205/45 or 215/15 tires 98sr20ve 03-19-2002, 09:23 AM Have you checked the weight of those wheels? Some Enkie's are reasonably light some are heavy. You can get some light Rota's in 16 to fit your needs for 450 a set. Lenso's are light. Enkie RPO 1's are light. Kosie K1, BBS RK's. I bought some 15 inch Rota Circuit 8's. 12.5 pounds in 15's only 400 a set. Tire rack has some SSR Integral on sale for $209 in 16inch. I would shoot for a wheel weight of 15-16 pounds or less in that size. Steve seriuss 03-19-2002, 06:15 PM I want something that has a stock look, but is also nice. I'm not too concerned about weight because I wont be racing it, but driving fast is another thing. pjsammy 03-31-2002, 04:50 PM Stupid question: Is the wheel offset the same as for Classics? I'm kind of a newbie when it comes to the B15--my collected SE-R knowledge is so far limited to my 91. Sammy Anime Gee 04-09-2002, 11:50 PM Go to: www.tirerack.com www.tires.com You can find out what wheels & tires fit your car. Go to: www.wheelweights.net Find out how much the wheels weigh & if they're cast or forged. | ||