Whats up, i got an maf plug off of a ga16de from the junk yard to use in my sr20det for a while and i was wondering if anyone new if the wire setup is the same as the sr plug. Its going to be used with an sr20de maf. Im not sure if any of this is gonna work but this is what i know so far. The sr plug setup is like this:

Pin A - nothing / not needed
Pin B - +12v power
Pin C - ground
Pin D - air flow signal out

The ga has one solid green and one solid red wire and one red/white striped wire. It hooks up perfectly to the DE maf and is identical except for the wiring colors. Does anyone know which wire is which if they are not in the same pin layout as above? And will the DE maf even work with the det?
Thanks for any help i in a big mess and i need some help bad!

i dont think thats gonna work.. i tried using diffrent NA SR20 MAF on my DET, it wont work, the cut-off would just reach 4K RPM, and the smoke is lik hell commin out of the tailpipes!
maybe if ur gonna use an Air Fuel Controller, that would work... i guess..

Thanks, you saved me a lot of trouble, i guess i got to get a det or z32 maf!