VIN #'s [Archive] - SR20 Forum

: VIN #'s


pathfinder7
02-14-2006, 10:24 AM
Hey everyone,
This is my first try on this forum.
I am looking for a VIN # cross refrence that i can use to find out what my car is equiped with before working on it.
Thanks for any help.

Fosters
02-14-2006, 11:10 AM
What kind of car are you talking about? Do you want to know if it is SR20DE, 5 speed, LSD, AD22's, etc? What are you looking to find out?

Josh

pathfinder7
02-14-2006, 11:17 AM
Thanks for the reply.
91 nissan sentra S E R.
Complete engine removal, transmision rework (5th gear pop out), water pump replace, srtuts, sway bars, springs and anyn thing else i can think of.

MR-4Door-SR20DET
02-14-2006, 11:22 AM
I need the VIN #'s for a "93 Nissan Sentra SE-R (Automatic)" I need to get the part numbers for the motor mounts and motor mount brackets. What'd up Josh

Nitelife
02-14-2006, 11:28 AM
Why don't you just call up a nissan dealership part department to find the parts you need.

Mossy or Courtesy are recommended on the board. I happen to also use Conicelli Nissan's service (partznet.com) since they are 10 minutes from me and offer the 25% internet sales discount for me.

Your VINs should be on a small placard on the dash, at the bottom of the driver side A-pillar. It's also along the firewall in the engine bay and most likely on the sticker in the driver door "well", by the latches.

pathfinder7
02-14-2006, 11:31 AM
Thanks , I have the title infront of me. I will call them.

MR-4Door-SR20DET
02-14-2006, 11:31 AM
Why don't you just call up a nissan dealership part department to find the parts you need.

Mossy or Courtesy are recommended on the board. I happen to also use Conicelli Nissan's service (partznet.com) since they are 10 minutes from me and offer the 25% internet sales discount for me.

Your VINs should be on a small placard on the dash, at the bottom of the driver side A-pillar. It's also along the firewall in the engine bay and most likely on the sticker in the driver door "well", by the latches.

I've been planning on doing that again, but everytime I call I get put on hold for ever! I will call again though and see what I can get. I don't own this car my signature states my problem.

Thanks for your repsonse

Nitelife
02-14-2006, 11:58 AM
Sorry, I don't have sigs activated, but I just took a look.

Try giving conicelli a call in Pennsylvania. Someone has always answered when I called. If possible ask for Seldon. Tell him you were trying to use partznet.com but couldn't locate the parts you were looking for. He can then access FAST (a more complete parts listing software) and you will still get the internet discount (25%). I think they may have free shipping, too.

MR-4Door-SR20DET
02-14-2006, 04:51 PM
Called the dealership on my lunch break and they couldn't tell me if the motor mounts and motor mount brackets where interchange from the B13 sr20de (auto) and sr20de (manual) minus the front mount the (manual) carries. I did found out that Japan made SE-R (AUTO's) in the 91,92,93 and 94, but they did not make them in 91 or 92 in the US. According the the data he looked up. Did anybody else no this, or did the guy have a mix up?