|
: Rotating the compressor housing?? SENTRASER 02-18-2006, 03:01 PM I always see diffrent turbo's avaliable for our cars, like the S14 and S15 turbos, but the compressor outlet is facing the wrong direction, it looks like it needs to be cocked 180 degree's. How do you do this and still mount the acctuator? I've been looking for gtir t-28's but all I see are S15 t-28's. NX2kDET 02-18-2006, 06:19 PM Dude I have the same problem right now...seriously if anybody makes a bracket for the wastegate actuator let me know, I know there is a big c-ring on the intake side you have to compress to release pressure on it. myprojectB13 02-18-2006, 06:31 PM On the S14 T28 all I needed to do was loosen the bolts on the backside of the compressor housing. If I rotate the turo straight up I can still manage to get one bolt through the stock wastegate actuator. ATP turbo makes a universal bracket which they claim can be used in almost every application. http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-WGT-009&Category_Code=BCS rage 02-18-2006, 07:05 PM not bad, i like that bracket. i guess another solution would be an external wastegate SENTRASER 02-20-2006, 03:21 PM Cool !! :) The next question is... did you have to make a custom j-pipe or downpipe or did one of the j-pipes line up? ? SENTRASER 02-21-2006, 09:39 AM tt.t...t..t.. cortrim1 02-21-2006, 10:17 AM On the S14 T28 all I needed to do was loosen the bolts on the backside of the compressor housing. If I rotate the turo straight up I can still manage to get one bolt through the stock wastegate actuator. ATP turbo makes a universal bracket which they claim can be used in almost every application. http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-WGT-009&Category_Code=BCS correct the gt series bracket from atp works on the s14/s15 t28. I am using one right now. cortrim1 02-21-2006, 10:18 AM Cool !! :) The next question is... did you have to make a custom j-pipe or downpipe or did one of the j-pipes line up? ? one of the holes on the j-pipe needs to be drilled larger so all 5 holes line up. I have a s15 turbo on a gti-r manifold with the gti-r j-pipe. SENTRASER 02-21-2006, 06:33 PM one of the holes on the j-pipe needs to be drilled larger so all 5 holes line up. I have a s15 turbo on a gti-r manifold with the gti-r j-pipe. sweet I guess I'll be doing some fun stuff here soon. :) R0b_ 02-22-2006, 01:04 AM The bb/avenir J pipe should bolt right up, the GTiR will need one hole to be enlarged. | ||