i lost my key fob for my alarm and i dont know what i can do to temporaily get my car started... its an old alarm thats been outta production.. so i dunno if i can get a new fob.. so how do i disable the starter kill function? any advise greatly appriciated..
rush

Is it similar to this?
http://www.bargainunlimited.com/servlet/Detail?no=185
I know 3.5 is very new. However, I was able to switch mine with it and did not have any problems.

Anyway, do you know where your programming button is? According to your manual, if you press it a X numbers with ignition on, it will reset the alarm.

Basically after that don't "arm" it till you get a new one.

naw its like from the 90s... like 93 to 95...

and for the switch i cant find it anywhere.. i would assume its a toggle since its an old school alarm..

the old clifford alarms suck... if you can't find your valet switch then you are gonna have to crawl under your dash and rewire your starter back to stock.... make sure you pull the main power for the alarm too...... and you probably won't be able to find another key fob for an alarm that old. And personally i wouldn't want to anyways, new alarms are way better and cheaper than what you have.

i will try to find the site that sells replacement fobs for many brands including older clifford models (you will probably be buying a viper one, same deal.) i will try to look for the link for ya

here is one i googled. not the one i meant to post, but it should help.
http://www.keylessride.com/default.asp

thanx jason... cars still just sitting here and its driving me nuts....

wheres your valet switch at you can just push the button tyhen turn car on and push button 3 times it should let you start it then