I was just wondering if anyone happen to have a Tials BOV, what are there comments? Like, dislike? All comments welcome.

Any sound clips?

Thanks

http://i35.photobucket.com/albums/d195/nism01997/ad7bfbe9.jpg

not a good bov for people not running at least 20 psi. it doesnt blow off on lower boost. but other than that it wont leak on yea. good valve

great valve that works well as long as you choose the right spring pressure

http://www.tialsport.com/documents/w3_tial_bov50_sp.pdf

here's a clip of the 50mm on geoff's car
TiAL 50mm & GT40R@30+psi (http://www.full-race.com/personal/geoff/mycivicgoesfast/pegdyno.wmv)

^^^I am going to use this one on my build, I have a 11psi spring...I love the design and its monsrtous look in person.:D

My uncle uses that same BOV on his SR powered Datsun. His car does see high boost so I would not know how it would react on low boost levels. He has had it for a long time and has never had issues with it. So I can say the quality of it is very good.

Obviously it cannot be recirculated...

My low boost will be around 10-12, and high boost 22+ so it should be fine for my needs. I plan on running blown threw as I would need to.

Thanks

I have one .Running 14.7 psi low boost and 32 lbs high boost works really well.

I too am thinking about getting one. wasn't sure till after I read this thread. Thanks for the sound clip javier. I think I'm sold on the tail vs the greddy type RS.

I have one on my sr20det, running around 15 psi and it was working good, when you first feel it, you will know your $200 was spent well. It is a piece you probably won't ever need to upgrade again.

It is probably on my top 5 list of parts that I bought for my car. I love this unit and with the 11psi spring it is great. Top notch quality and I love the sound!