http://www.sr20de.org/images/images/NX%202000/intake%20manifold%20TB.jpg http://www.sr20de.org/images/images/Sentra%20SE/intake%20manifold%20rear.jpg

These are of a DE manifold

I have a bb DET installed so some things are aliitle different.

1. I have this connected to my FPR

2. I have this connected to the top connection of the carbon canister

3. I have a line on my IC piping after BOV and before TB that connects here

4. the BB det manifold has a connection here. I have it going to my BOV/Guage/carbon canister(connection below the one above)

5. Vaccum for brake booster.

Ok guys if somthings not right here please help me.

I've got to bleed the brakes so I can take her for a spin.
She fine intill shes warm then she jumps from 750ish to 1500 and back. I'll be removing the AAC and doing a cleaning to it to see if that helps. also I'll check that engine compartment (2) fuse.

I checked the pressure regulator under the manifold and it seems fine. but when I got my DET id didn't have one so I got the one off my DE.

Thanks,
http://www.sr20de.org/images/images/Sentra%20SE/engine%20bay%20angle.jpg

Dwayne-

Sorry I can be of much help at this moment since I am installing my stuff very soon and would be able to help you out during then... But I just wanted to say... Much props on how the engine bay looks... Can't wait to get mine done...

thanks

its been a long time comming.

2 years to be exact.

List of goodies
BB DET
Turbonetics T3/T4 .63 a/r stage 3
Custom Manifold (like f-max)
Spearco IC
stanless steel IC piping
Blitz BOV
JWT ECU 3 bar
Cobra MAF
50lb msd's
FTF fuel rail
Walbro 255 pump
stainless Steel 3" turbo back exhaust
JWT mounts
ACT 6 puck
ACT HD pp

Dyno Numbers to come

mind me asking... no S3's?? I am doing my set-up very very similar to yours... wonder what numbers we'll end up with... though I am using a smaller turbine of the T04E...

Eric T.

P.S. everyone is in for a nice surprise...

no s3's yet maybe later right now its just getting the car back on the road.

OOh, did you get those pictures from another website that says what goes connected to that? Or did you make it yourself? That would be really great for me to know where to connect all those lines, I'm installed a BB T25 setup on my car in a few months

I took the pictures of my DE manifold and I have a DET installed in the car. This is the way I have it installed and I was trying to find out from some others if this is correct.