Anyone know the size and length/pitch of the front caliper pin bolts on a 98 SE-R? Snapped one changing my pads. Damn cheap-ass torque wrenches. :mad:

I have a bolt that I have been using to mount the Wilwood test caliper for the Fastbrakes kit. The bolt is a 10mm and the pitch is 1.25mm. The length of this bolt is 30mm but I think the stock one is longer. NOT sure on the length. If you really need that and don’t know by the morning let me know and I will pull it again and measure for you.

Steve

Edit: Also, use a grade 8.8 or better.

OK, thanks. Let me know if you can get the exact length on it then. It's a real PITA to locate the correct bolt by trial and error.

The bolt is 30 mm long from the bottom of the bolt head to the end of the threads.

Steve

Thanks alot, going to the hardware store.