sleeper14
04-19-2006, 08:12 AM
i bored a 92 maf and high polished the inside
however when i installed it, it idled really rough
i have a std jwt ecu upgrade and a fpr
i know it is running leaner but is there anything i can do to get it to idle smoother or would it require a reprogram from jwt
someone suggested to raise the fp
any ideas guys on the diy mod
coryb13ser
04-19-2006, 09:46 AM
find out what the ecu is programed for, and get that diameter maf. it sounds like its programed for a stock maf, just go get a stock housing and see if it runs any better. make sure you set the fuel pressure at 36psi w/ vacume and 44 w/o
sleeper14
04-19-2006, 10:24 AM
yup reprogram made for a std maf
i reinstalled the original one and all is well
i will try reinstalling it and bumping fuel pressure also to see if it evens out
coryb13ser
04-19-2006, 11:24 AM
yup reprogram made for a std maf
i reinstalled the original one and all is well
i will try reinstalling it and bumping fuel pressure also to see if it evens out
dont do that, just send the ecu back to jwt and have it tuned for your maf bored
go ahaid and raise the fuel pressure, but its not a good way to go about it.
to keep your afr where it should be under load your going to need to raise the fuel pressure quit a bit, but at idle that larger maf wont be pulling much more air, so your idle will jsut be really rich.
do it the right way, there is no reason to have a bored maf unless your making over 240whp. and if you are, get your ecu retuned.
spdracerUT
04-19-2006, 11:55 AM
uh... why did you bore it out in the first place?
sleeper14
04-20-2006, 11:21 AM
i had a spare housing and a machine and was bored so i bored, lol
will try bumping pressure on the fpr and see if it helps, if not JWT for him
evilsr20degg
04-21-2006, 02:50 AM
i bored a 92 maf
you should take it to the movies and then to kings dominion or six flags or something that normally entertains them.
worldcrafter
04-21-2006, 03:31 AM
got my bored MAF from SP Competition today, it looked like ass (no offense SP), and I was more bored than the MAF was, so I cleaned it up
http://www2.hawaii.edu/~jescasa/sentra/maf/boredmaf1.jpg
http://www2.hawaii.edu/~jescasa/sentra/maf/boredmaf2.jpg
sleeper14
04-21-2006, 09:14 AM
and it worked with what ecu program or what adjustment
8pinoy8
05-06-2006, 08:01 PM
got my bored MAF from SP Competition today, it looked like ass (no offense SP), and I was more bored than the MAF was, so I cleaned it up
http://www2.hawaii.edu/~jescasa/sentra/maf/boredmaf1.jpg
http://www2.hawaii.edu/~jescasa/sentra/maf/boredmaf2.jpg
wow, looks good Jeremy
Jaketips42
05-07-2006, 05:59 PM
Yeah, I threw in a maf I bored myself and it would cough inbetween gears and just not seem right. So I put the original back and it's better again.